Applicable to SunDAT Pro, Standard, & Essential


Overview

Figure - Table Creation-Fixed Tilt Rooftop


Icon
Description
1

Choose to create a new table or select a table to edit

2
Table name.  If new table, enter name for table
3
Orientation - Choose the orientation of the module
4
Slope - Choose if using single or a dual rooftop system
5
Choose the module that the table will use.  If a module was selected in Site Overview or used in project, that module will be bookmarked
6
(Optional) Choose a related PvBid rack type - Selecting a product, if it is available, will apply the cost information for the structure to Cost estimation results if cost estimation is activated in PV Layout. 
7
(Optional) Choose a structure product.  This is for selecting a Panelclaw product which can be sent to ClawOS.
8
String size - specify number of modules per string.  If in Site Overview, a weather source file and inverter has been selected, and a module has been picked, SunDAT will recommend a string size based on that information.  Also, double-clicking the input description, will bring up the string size calculator.
9
Rows per table- The number rows in a table, sometimes called the number of modules high.  
10
Modules per table - Specify the number of modules that will be in the table
11
Module spacing - the spacing distance between modules
12
Table height - Height from the ground to the bottom of the module at the lowest point of the table when tilted.
13
Table Tilt - Tilt angle of the fixed tilt table in degrees 
14
Create button - generate the table based on the inputs above 
15
Reset button - clears all the inputs
16
Delete button - Erases an existing table in the model.  An existing tracker table has to be selected first.
17
Favorite - Saves the table as a favorite so it can be used for future projects
18
Un-Favorite - Removes tables from favorites and will not be available for future projects

Learn More

To be updated soon


FAQ/Troubleshooting

Related

To be updated soon